Patents

Simasv's success lies in its experience and ability to gather and interpret market indications - nothing is left to chance. Indeed, certain innovations introduced on to the market are the result of specific requests on the part of customers, which have been studied, examined down to their finest detail and then developed by the Technical Office.

BENDING PRESS

Punch- and die-carrier conical pin rapid locking device with interchangeable punches and dies in bending machines

A punch- and die-carrier conical pin rapid locking device with interchangeable punches and dies, considerably reducing the substitution time of these bending press tools, while providing the greatest level of safety in the use of the machine

NOTCHING MACHINE

Automatic blade slack adjustment system for shear cutting of sheet metal (applied on models AF/B - AV/B - AV/PA)

L'Automatic blade slack adjustment system during sheet metal shear cutting, which is simpler than popular adjustment systems. Providing a greater degree of operating reliability, this system is particularly suited to asymmetric cutting.

Automatic shear blade slack adjustment device for sheet metal cutting (applied on model AF258/P)

A device for the automatic adjustment of upper and lower shear blade slack during the cutting of sheet metal, whose main objective is the control of the shifting of the upper blades with respect to the lower blades in a pre-fixed direction with respect to the cutting direction in asymmetric cutting

Variable angle shears upper blade adjustment device

A device allowing the adjustment of the upper blades with respect to the lower blades by acting directly on the blade holder. The device also allows a safe and precise adjustment of upper blade movement with respect to lower blade movement without the need to remove the safety protection.

Variable angle shears with punching unit

Shears equipped with a punching unit and cutting unit with a variable angle blade allowing the cutting of angles of different sizes.

Variable angle universal shears

The cutting angle of these variable angle universal shears can be varied from a minimum value of 30° to a maximum value of 180°.

PUNCHING MACHINE

Improved punching machine for sheet metal punching

An improved punching machine allowing for an assembly of the punch-holder cartridge in the cartridge-holder block hole, which is simpler and faster than similar popular punching machines. Its aim is to eliminate the problem of the punch-holder cartridge jamming in the cartridge-holder block during the substitution of the cartridge, which occurs in the more popular punching machine models. The cartridge is quicker and easier to change compared to similar popular punching machines.