| How many driving rolls are there?
|
| Our bending machines are available in two- or three-driving roll versions. |
|
| Is adjustment of the hydraulic or mechanical type? |
| The only model available with two driving rolls has mechanical adjustment.The version with three driving rolls foresees models with mechanical adjustment (C series ), hydraulic adjustment with mechanical end-of-stroke device (CH series), visualised hydraulic adjustment (CHV series) or CN. |
|
| How many types of operation are possible? |
| There are two types of command to operate our bending machines: double pedal board and manual control. |
|
| What is the function of the double pedal board? |
| The double pedal board has two pedals, one to rotate the rolls in a clockwise direction and the other to rotate them in an anti-clockwise direction. |
|
| What is the function of the calibrator rolls? |
| The function of the calibrator rolls is to keep the section bar straight during the bending phase. |
|
| What is the function of the double handwheel and the double lever in the CH models? |
| The purpose of the double handwheel is to adjust the movement and the tilt of the rolls right and left respectively on the manual bending machines. |
|
| Can the bending machines also work horizontally? |
| Certainly. When certain operating conditions require it, it is possible to set the bending machine on its back in such a way as to carry out horizontal bending works . |
|
| Which section bars can be bent with the rolls supplied? |
| It is possible to bend a great number of bars, section bars and tubes: flat bars and rib section bars, "L", "T", "U" shaped section bars, square and rectangular tubes (excluding thin wall tubes requiring special rolls). |
|
| Is it possible to bend round, rectangular and square tubes? |
| Certainly. Special rolls are supplied allowing the bending of round, rectangular and square tubes of different materials (iron, stainless steel, aluminium,…) |
|
| How can I determine which bending machine is suitable for the bending of a certain section bar or tube? |
| The information required by the manufacturer in order to suggest the bending machine most suited to the type of work to be carried out are; the type of material, section bar dimensions, minimum bending diameter, degree of finishing and the required tolerances. |
|
| Which SIMASV bending machines can be used for working both horizontally and vertically? |
| Today SIMASV produces the 2 driving rolls CE2 model which is available also with tilting rolls bench: this version is called CE2/R. |
|
