 |
|
Bending presses > T22 Scanja
The special structure of the T22 Scanja press makes this machine ideal for press bending, bending, punching and cutting of all types of section bars, flat bars and tubes. The positioning of the cylinder under the workbench allows freedom of action for any type of operation on the workbench, and the controls set at the front of the machine give the operator a high degree of control over the working area during the operating phases.
The workbench is manufactured in tempered and ground steel, the carriage runs on double guides with dust scraper and manual lubrication. The mobile pin moves at two speeds and the stroke is adjusted via a high precision electrical limit switch.
|
TECH SHEET |
| Workbench dimensions |
mm |
630x1100 |
|
|
|
| Height of workbench from the ground |
mm. |
925 |
|
|
|
| Max operating pressure |
Ton |
22 |
|
|
|
| Carriage stroke |
mm |
200 |
|
|
|
| Carriage speed |
mm./' |
1750 |
|
|
|
| Mobile punch operating speed |
mm./' |
470 |
|
|
|
| Speed selection device |
|
SI/YES |
|
|
|
| Press bending capacity |
mm |
120x15 |
|
|
|
| Tool holding pins - Height |
mm |
120 |
|
|
|
| Tool holding pins - Diameter |
mm |
55 |
|
|
|
| Hydraulic power unit |
Lt. |
45 |
|
|
|
| Maximum required power |
Hp / Kw |
2,5/1,5 |
|
|
|
| Side tool shelves |
n. |
optional |
|
|
|
| Bending press dimensions - Width |
mm |
630 |
|
|
|
| Bending press dimensions - Length |
mm |
1100 |
|
|
|
| Bending press dimensions - Height |
mm |
925 |
|
|
|
| Weight |
Kg |
630 |
|
|
|
|
|
ATTACHMENT |
 |
Horizontal hydraulic presses |
|
