T40 SUPER


In designing this series of machines, the main consideration was operator requirements. All models in fact have been designed in such a way as to ensure a generous working surface for carrying out a wide variety of operations.
Another characteristic is the micrometric stroke adjustment controlled by a hydraulic valve; this allows the continuous adjustment of the punch operating stroke and the highest degree of precision to obtain the desired bending angle.
The T40 model, including the digital versione, is fitted with fixing pins in a conical form (patented) for a perfect adherence to the workbench and to completely eliminate mechanical slack; they can be locked and unlocked with great ease using the special key.
The whole series features a workbench in welded and stabilised steel, suitably shaped and dimensioned to operate with loads double those characteristic of the machine to avoid deformation.

The alloyed steel carriage runs on oversize guides, tempered and ground, fitted with lubrication channels and special dust scraper. Lubrication plays a fundamental role and all models are therefore equipped with a manual lubrication pump for the distribution of the lubricant to all vital points of the machine. In models weighing over 40 tons, lubrication is carried out via automatic pump with an electrical device indicating the oil level.
The oil-hydraulic cylinder has been designed for average pressures such as to ensure the maximum balance between machine performance and lifespan of the most sensitive machine parts. The whole system is controlled by a hydraulic power unit consisting of a tank suitably sized to avoid damaging overheating of the oil and is fitted with measuring, regulation and hydraulic flow control instruments.
In short, the SIMASV® bending presses are designed right down to the smallest and apparently most insignificant detail in order to offer complete and state-of-the-art products.

simasv t40 super
Workbench dimensions625x1100 mm
Height of workbench from the ground950 mm
Max operating pressure40 ton
Max. stroke of mobile punch250 mm
Mobile punch stroke adjustmentYES
Mobile punch advance and retrieval speed1750/1980 mm/'
Mobile punch operating speed470 mm/'
Speed selection deviceYES
Min. and max. axis base between mobile and fixed pins120/370 mm
Press bending capacity120x25 mm
Tool holding pins - Height120 mm
Tool holding pins - Diameter55 - 63 (opt.) mm
Mobile and fixed pins - Height120 mm
Mobile and fixed pins - Diameter55 - 63 (opt.) mm
Hydraulic power unit50 Lt
Slide lubricationManual.
Maximum required power4/3 Hp/Kw
Side tool shelves2
Bending press dimensions - Width1200 mm
Bending press dimensions - Length1150 mm
Bending press dimensions - Height950 mm
Weight900 kg